Yahoo 知識+ 將於 2021 年 5 月 4 日 (美國東岸時間) 停止服務，而 Yahoo 知識+ 網站現已轉為僅限瀏覽模式。其他 Yahoo 資產或服務，或你的 Yahoo 帳戶將不會有任何變更。你可以在此服務中心網頁進一步了解 Yahoo 知識+ 停止服務的事宜，以及了解如何下載你的資料。
Bike shudders when starting, and clutch feels different...?
Hi all,
My bike started acting up today at a set of traffic lights. I stopped, clutch in and kept it in gear - the bike then stalled. So, i thought, meh, start her up! Upon pressing the starter button, the bike kind of shivered whilst starting up, then started fine - I had to hold in my front brake or I would move forward. The bike wouldn't live if I wasn't applying revs. The clutch lever has gone a bit loose since then. It's also not downshifting well - It's solid, until I leave the clutch out and pull it back in, then downshift again. Someone has recommended it could be the clutch cable, but before I go and buy a new one I need to be sure it is the cable. The bike is a Lexmoto XTRS 125. If you need any more info let me know.
Thanks in Advance,
4 個解答
- AndyLv 78 年前最愛解答
It's very possible your clutch cable is stretching or fraying and getting ready to break. They usually break at the end(and the lever end more often than the clutch end). So check each end to see if there's frayed wires. If it looks good just adjust it til you have the right free play which is checked by the gap between the lever and the housing where the lever mounts. Free play is generally about an 1/8 inch gap. It could also be needing fresh oil. I'd suspect the cable first though.
- Philip PLv 78 年前
when at traffic lights you select neutral.
otherwise you could be in too high a gear when you set off
It is possible that you were not in first at the lights
you've pulled away ( hence it stalled)
You've then started not selected first and process of pulling away in too high a gear has caused the clutch to wear
If you've done this everytime you've pulled up... then you have damaged the clutch.
- 匿名8 年前
You will need to adjust the cable. If this is beyond you [and it is] a shop will do it properly and cheaply.
