Yahoo 知識+ 將於 2021 年 5 月 4 日 (美國東岸時間) 停止服務,而 Yahoo 知識+ 網站現已轉為僅限瀏覽模式。其他 Yahoo 資產或服務,或你的 Yahoo 帳戶將不會有任何變更。你可以在此服務中心網頁進一步了解 Yahoo 知識+ 停止服務的事宜,以及了解如何下載你的資料。

how do I turn off the DHCP or configure settings on my second router so I can connect 2 routers (Lan to Lan) together?

I have a Dlink router

http://www.amazon.com/D-Link-Wireless-AC1900-Gigab...

and I'm using it as a 2nd router

I tried to go to it's settings on the webpage to turn off DHCP

and when I go to the internet settings, it doesn't have an option to turn off DHCP

It just shows Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP, and DS-Lite

how do i configure my second router so i can connect my 2nd router to my main router (Lan to Lan)

4 個解答

相關度
  • 6 年前
    最愛解答

    You set the LAN settings to not use DHCP not the internet settings!

    In the INTERNET settings you set an IP address of the FIRST ROUTER LAN (like 192.168.1.X using a last number that is static). The DHCP settings that you need to turn off are not on the INTERNET side, they are on the LAN (local network) setup pages.

    PS once this is done, you will not use the Internet/WAN port on the 2nd router, you will connect to one of the four computer ports from router one! These settings take the routing function of router two and turn it off. It works as a switch / access point.

    資料來源: Years - TL
  • 匿名
    6 年前

    You must NOT. The seconf router will try to pass all traffic to its; oen wan pott. And there can necer be a reasin ti. You have no cluse about networking, so qhy not explain qhat you think you want to do.

  • 6 年前

    What you're looking at would be how it sets its own IP address, not whether it assigns them.

    You may find it elsewhere in the settings, or you might find if you plug a cable into another Ethernet Port than the WAN one, that it sets the DHCP on its own to off.

  • 6 年前

    you dont have to change any settings....

    just connect the internet port of one router to one of the outputs of the other router....

還有問題嗎?立即提問即可得到解答。