Yahoo 知識+ 將於 2021 年 5 月 4 日 (美國東岸時間) 停止服務,而 Yahoo 知識+ 網站現已轉為僅限瀏覽模式。其他 Yahoo 資產或服務,或你的 Yahoo 帳戶將不會有任何變更。你可以在此服務中心網頁進一步了解 Yahoo 知識+ 停止服務的事宜,以及了解如何下載你的資料。

95 Chevy Truck Blend Door Bypass options?

Working on above mentioned truck and have issues with the heat not reaching the defrost side of the blend door/plenum because the Climate Control panel is probably shot. Need a way to over-ride or bypass the electronic control for a few days while the part is on order or I can hunt local yards for panel. Would rather not have to damage the actuator motor assembly itself either-would hate to add more problems onto the list by snapping a nylon gear or over-stopping a motor.

The Climate Control Panel is a known issue and I might be able to trouble shoot it when my friend shows up with truck,but that seems to be a smoked potentiometer or broken connection to a transistor from what I read.

So, if there is a way to get the door to swap from cold to hot without major stress just as a stop-gap measure I'd like to hear about it.

更新:

Forgot to add is a 2500 Silverado, not S-10.

2 個解答

相關度
  • 匿名
    9 年前
    最愛解答

    Take the actuator off the door (unplug it first)

    And move the door by hand it should stay in whatever position u put it in.

    資料來源: Years of experince
  • 9 年前

    You can try this , get a chiltons repair manual $15.00 bucks and look in the hvac part and on the climate control on that truck a think has a bleand air system and it has stepper moters to operate the bleand air door for the heat _a/c door and i think if you pull the glove box out look in and just to the left will be a small cover over a box with wires comming out of it and that is the blend air stepper moter for the blend air door i think i hope this helped ya and good luck oh if you can get the blend air door to go over to the evap coil to let the heat come in un plug the stepper moter and you will be good for the winner .

    資料來源: drpeppers
還有問題嗎?立即提問即可得到解答。